User Guide

2-4
Chapter 2: Boot Agent Conguration
Option ROM [Enabled]
Conguration options: [Enabled] [Disabled]
Boot Protocol [Preboot Execution Environment (PXE)]
Conguration options: [Preboot Execution Environment (PXE)]
[iSCSI] [None]
Boot Strap Type [Auto]
Conguration options: [Auto] [BBS] [Int18h] [Int19h]
Hide Setup Prompt [Disabled]
Conguration options: [Disabled] [Enabled]
Setup Key Stroke [Ctrl-S]
Conguration options: [Ctrl-S] [Ctrl-B]
Banner Message Timeout [5 Seconds]
Conguration options: [None] [1 Second] – [14 Seconds]
Link Speed [AutoNeg]
Conguration options: [AutoNeg]
Pre-boot Wake On LAN [Enabled]
Conguration options: [Enabled] [Disabled]
VLAN Mode [Disabled]
Conguration options: [Disabled] [Enabled]
VLAN ID [1]
Conguration options: [0] – [4094]
Boot Retry Count [0]
Conguration options: [0] – [7]
2.1.2 MBA Configuration Menu
Comprehensive Conguration Management v7.10.31
Copyright (C) 2000-2014 Broadcom Corporation
All rights reserved.
Option ROM : Enabled
Boot Protocol : Preboot Execution Environment (PXE)
Boot Strap Type : Auto
Hide Setup Prompt : Disabled
Setup Key Stroke : Ctrl-S
Banner Message Timeout : 10 Seconds
Link Speed : 10Gbps
Pre-boot Wake On LAN : Enabled
VLAN Mode : Disabled
VLAN ID : 1
Boot Retry Count : 0
MBA Conguration Menu
Enable/Disable Option ROM
[←|→][Enter][Space]:Toggle Value; [↑|↓]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7