User Guide

2-2

Chapter 2: Boot Agent Conguration

2.1 Broadcom NetXtreme Ethernet Boot Agent

The Broadcom NetXtreme Ethernet Boot Agent provides hardware-based Ethernet card

congurations.

To start the Broadcom NetXtreme Ethernet Boot Agent and access the main screen:

1. Turn on the system.

2. During POST, press <Ctrl>+<S> when the following screen appears.

3. From the

Device List

screen, use the up/down arrow key to select an Ethernet device

to congure then press <Enter>.

Broadcom NetXtreme Ethernet Boot Agent

Press Ctrl-S to enter Conguration Menu

Select Device to Congure

[Enter]:Enter Next Menu; [↑|↓]:Next Entry; [ESC]:Quit Menu

4. From the

Main Menu,

use the up/down arrow key to select an item and press <Enter>

Comprehensive Conguration Management v7.10.31

Device Hardware Conguration

MBA Conguration

iSCSI Boot Conguration

NIC Partition Conguration

Main Menu

Congure Device Hardware Parameters

[Enter]:Enter ; [↑|↓]:Next Entry; [ESC]:Quit Menu

Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7

Comprehensive Conguration Management v7.10.31

<03:00:00> BCM57840 - 00:E0:18:09:05:2C MBA:v7.10.33 CCM:v7.10.31

<03:00:01> BCM57840 - 00:E0:18:09:05:2E MBA:v7.10.33 CCM:v7.10.31

Device List

Select Device to Congure

[Enter]:Enter ; [↑|↓]:Next Entry; [ESC]:Quit Menu