User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- Appendix
41
To install an M.2 4G module:
1. If the stando is already seated in the right mounting hole to t your
M.2 module, skip to step 3.
2. Unscrew the stando and install it to a mounting hole that matches the
length of your M.2 module.
3. Align and insert the M.2 module into the slot.
4. Press down the M.2 module, and secure it in place using two (2) screws.
5. Connect the antennas to your M.2 module.
NOTE: Connect ANT. 6 for GPS satellite tracking capability.
ANT.4
ANT.6
ANT.5