User Manual

40
Your Embedded Computer comes with an M.2 (B-key, supports 3042/3052)
slot that allows you to install an M.2 5G/4G/UDR GPS module.
3.7 Installing an M.2 B-key module
To install an M.2 5G module:
1. If the stando is already seated in the right mounting hole to t your
M.2 module, skip to step 3.
2. Unscrew the stando and install it to a mounting hole that matches the
length of your M.2 module.
3. Align and insert the M.2 module into the slot, press it down, and secure
it in place using a screw.
4. Connect the antennas to your M.2 module.
ANT.4
ANT.1
ANT.5
ANT.6
WARNING! RF modules are intended for OEM or host integrators only.
For availability of system level RF certication, check with your OEM
integrator.