User Manual

23
2.1.2 Connect a display panel to your Embedded
Computer
You can connect a display panel or projector that has the following
connectors to your Embedded Computer:
• HDMI™
• DisplayPort
To connect an HDMI™ display panel:
Connect one end of the HDMI™ cable to an external display, and the other
end of the cable to your Embedded Computer’s HDMI™ port.
NOTE: If you are using a HDMI™ cable with a locking screw connector,
tighten the lock screw onto the cable lock screw hole on the chassis to
prevent disconnection caused by tension or vibration.
Connect display via HDMI™ port