User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- Appendix
13
USB 5Gbps port with cable lock
The USB (Universal Serial Bus) 5Gbps port provides a transfer
rate up to 5 Gbit/s.
NOTE: The cable lock helps to prevent disconnection
caused by tension or vibration.
USB 2.0 port with cable lock
The USB (Universal Serial Bus) port is compatible with
USB 2.0 or USB 1.1 devices, such as keyboards, pointing
devices, ash disk drives, external HDDs, speakers,
cameras, and printers.
NOTE: The cable lock helps to prevent disconnection
caused by tension or vibration.
Dual-mode DisplayPort
The DisplayPort 1.2 port can support resolutions up to 4096 x
2160 @ 60 Hz on external display devices.
HDMI™ 1.4 port with cable lock
The integrated HDMI (High Denition Multimedia Interface)
port with a receptacle connector can support resolutions up
to 4096 x 2160 @ 30 Hz on external display devices.
NOTE: The cable lock helps to prevent disconnection
caused by tension or vibration.
Microphone input jack
The microphone input jack is used to connect your
Embedded Computer to an external microphone.
Audio output jack
This stereo audio jack is used to connect the system’s audio
out signal to amplied speakers.