User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
63
1. Follow steps 1 and 2 of Replacing the CMOS battery to remove the
metal cover of the nano SIM card / CFast card combo slot.
2. Insert your nano SIM card(s) into the nano SIM card slot(s). Ensure that
the nano SIM card is pushed all the way into the nano SIM card slot.
3. Follow steps 7 and 8 of Replacing the CMOS battery to replace the
metal cover of the nano SIM card / CFast card combo slot.
NOTE: The Nano SIM card is purchased separately.
Your Edge computer comes with two (2) nano SIM card slots.
3.10 (optional) Installing a nano SIM
card