User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
61
5. Push the new battery into the battery compartment.
6. Connect the battery cable to the extension cable, then slowly push the
cable into the Edge Computer chassis.
NOTE: You may remove the side cover to make it easier for you to
push the extension cable into the Edge Computer chassis. For more
information on removing the side cover, please refer to Removing the
side cover.