User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
58
PE400D Series
4. Replace the storage device tray. To ensure that the connector of the
storage device is properly connected inserted to the HDD slot inside
the Edge Computer, the thumbscrews on the storage device tray
should be properly aligned to the screw holes on the front of the Edge
Computer when replacing the storage device tray.
5. Push the thumbscrews down then tighten them to secure the storage
device tray.