User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
53
3.7 Installing a PCIe expansion card
Your Edge Computer comes with three (3) PCIe expansion slots which will
auto-detect the expansion card installed and adjust bandwidth between 1 x
PCIex16 + 1 x PCIex4 or 2 x PCIex8 + 1 x PCIex4.
NOTE: Supports max. length < 192mm, and max. 100W supply from
mainboard for three (3) slots in total.
To install a PCIe expansion card:
1. Remove the screw securing the metal bracket of the PCIe expansion
slot from the front of the Edge Computer, then remove the metal
bracket.