User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
51
3.6 Installing an M.2 M key module
Your Edge Computer comes with an M.2 (M-key) slot that allow you to install
an M.2 SSD (M-key, supports 2242/2260/2280 PCIe x4 or SATA) module or
M.2 B+M key Coral TPU module.
To install an M.2 SSD module:
1. Install the stand screw to a slot which matches the length of your M.2
SSD module.
2. Align and insert the M.2 SSD into its slot inside the Edge Computer,
then gently push down the M.2 SSD on top of the stand screw hole and
fasten it using a screw.