User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
45
3.3 Installing memory modules
Your Edge Computer comes with a SO-DIMM memory slot that allow you to
install two (2) DDR4 SO-DIMMs, ECC*, with a maximum of 64GB.
NOTE: ECC only available when using Xeon CPU.
Align and insert the memory module into the slot (A) and press it down (B)
until it is securely seated in place.