User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
41
3.1 Removing the side cover
1. Turn o๎ your Edge Computer then disconnect all cables and
peripherals, then place the Edge Computer on a ๎at stable surface, with
its top side facing down.
2. Remove the screw from the bottom of the Edge Computer.
3. Loosen the two (2) thumbscrews on the rear of the Edge Computer
securing the side cover.