User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
37
2.2 Installing the desk mount
You can install your Edge Computer to a suitable surface using the desk
mounts.
Align the desk mount with the screw holes on the bottom of the Edge
Computer, then secure the desk mount to your Edge Computer using the
bundled screws.
IMPORTANT! When installing the Edge Computer into a cabinet or on
the ground, we strongly recommend installing your Edge Computer
so that the Edge Computer sits upright with the top of the Edge
Computer facing upwards to allow for eîcient heat dissipation.
Desk Mount Screw
Length: 6.0 mm
Diameter: 7.7 mm