User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
34
PE400D Series
2.1.2 Connect a display panel to your Edge
Computer
You can connect a display panel or projector to your Edge Computer that
has the following connectors:
• HDMI™ connector
• DisplayPort connector
To connect a display panel to your Edge Computer:
Connect one end of an HDMI™ cable to an external display, and the other
end of the cable to your Edge Computer’s HDMI™ port.
Connect display via HDMI™ port