User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
33
NOTE:
• Please refer to the following for more information on the adapter:
330W Power adapter
- Input voltage: 100-240 Vac
- Input frequency: 50-60 Hz
- Rating output current: 13.75A (65.0 W)
- Rating output voltage: 24.0V
• If you are using another power supply, ensure to use a 9Vdc-36Vdc,
36.66A-9.16A power supply.
IMPORTANT!
• We strongly recommend that you use only the AC power adapter
and cable that came with your Edge Computer.
• We strongly recommend that you use a grounded wall socket while
using your Edge Computer.
• The socket outlet must be easily accessible and near your Edge
Computer.
• To disconnect your Edge Computer from its main power supply,
unplug your Edge Computer from the power socket.