User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
24
PE400D Series
6. ME Lock jumper
This jumper is used to lock the Intel
®
Management Engine (IME). When
the Intel
®
ME is locked, no changes can be made to the Intel
®
ME. This
jumper should only be set to ME Unlock when there is an important
update available from Intel
®
.
IMPORTANT! Setting this jumper to ME Unlock and changing the Intel®
ME without proper instructions may cause the BIOS to crash.
NOTE: The default setting for this jumper is set to Me Lock with a
jumper cap attached.