User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the side cover
- 3.2 Replacing the side cover
- 3.3 Installing memory modules
- 3.4 Installing an mPCIe / mSATA module
- 3.5 Installing an M.2 E key module
- 3.6 Installing an M.2 M key module
- 3.7 Installing a PCIe expansion card
- 3.8 Installing a storage device
- 3.9 Replacing the CMOS battery
- 3.10 (optional) Installing a nano SIM card
- 3.11 Installing a CFast card
- Appendix
PE400D Series
13
Power button
The power button allows you to turn the Edge Computer
on or o. You can use the power button to put your Edge
Computer to sleep mode or press it for four (4) seconds to
force shutdown your Edge Computer.
Nano SIM card / CFast card combo slot
This combo slot allows you to insert two (2) Nano SIM cards
to the top slot or a CFast card to the bottom slot.
NOTE:
• This slot is covered with a metal cover. Ensure to
remove and replace the metal cover when installing
a Nano SIM card and/or CFast card. For more
information on removing and replacing the metal
cover, please refer to Installing a nano SIM card or
Installing a CFast card.
• We recommend using the CFast card for OS storage.
LAN port
The Intel I210-AT Gigabit Ethernet controllers with 8-pin RJ-45
LAN port supports a standard Ethernet cable for connection
to a local network.
USB 3.2 Gen 2 port
The USB 3.2 Gen 1 (Universal Serial Bus) port provides a
transfer rate up to 10 Gbit/s.
USB 3.2 Gen 1 port
The USB 3.2 Gen 1 (Universal Serial Bus) port provides a
transfer rate up to 5 Gbit/s.