User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Installing a storage device
- 3.2 Removing the top heatsink
- 3.3 Replacing the top heatsink
- 3.4 Installing an MXM GPU module
- 3.5 Removing the heat spreader
- 3.6 Installing an M.2 M-key module
- 3.7 Installing an M.2 E-key module
- 3.8 Installing an M.2 B-key module
- 3.9 Installing an mPCIe / mSATA module
- 3.10 Installing a nano SIM card
- 3.11 Installing memory modules
- Appendix
26
IMPORTANT!
• We strongly recommend that you use only UL-certied power
supply, power adapters, and cables that meet the following
requirements or ones that you purchased as an option with your
Embedded Computer.
480 W Power supply (purchased separately)
Input voltage: 100-240 Vac
Input frequency: 50-60 Hz
Output current: 20 A (480 W)
Output voltage: 24.0 Vdc
Operating temperature: -20˚C to 60˚C
System
Rated input current: 41.25-6.88 A (480 W)
Rated input voltage: 8-48 Vdc
Operating temperature: -20˚C to 60˚C
• We strongly recommend that you use a grounded wall socket while
using your Embedded Computer.
• The socket outlet must be easily accessible and near your
Embedded Computer.
• To disconnect your Embedded Computer from its main power
supply, unplug your Embedded Computer from the power socket.