User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing an SD card
- 3.8 Installing a wireless card to the M.2 slot
- 3.9 Installing an mPCIe / mSATA module
- 3.10 Installing the antennas (optional)
- 3.11 Installing the USB 2.0 module (on selected models)
- 3.12 Installing the Serial port module (on selected models)
- 3.13 Installing the PoE LAN module (on selected models)
- 3.14 Installing the VESA mount (optional)
- 3.15 Installing the wall mount
- 3.16 Installing DIN rail clips (optional)
- Chapter 4: Using the software
- Chapter 5: Watchdog Timer
- Appendix
PE Series
73
4.2.2 Dashboard
Data lter:
Select a time range to lter the data displayed on the dashboard.
Summary:
Displays the amount of male and female identied on a line graph
and the total amount of people. The data may vary between hour
of the day, day of the week, or day of the month according to the
selected time range lter.
Age Distribution:
Displays a line graph of the amount of dierent age groups
detected. You may select to display or hide an age group in the
drop down menu Age Group in the top right corner of the Age
Distribution graph.
Gender Ratio:
Displays the daily, weekly, or monthly male / female ratio for
people identied by IEC Vision.