User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5โ storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing an SD card
- 3.8 Installing a wireless card to the M.2 slot
- 3.9 Installing an mPCIe / mSATA module
- 3.10 Installing the antennas (optional)
- 3.11 Installing the USB 2.0 module (on selected models)
- 3.12 Installing the Serial port module (on selected models)
- 3.13 Installing the PoE LAN module (on selected models)
- 3.14 Installing the VESA mount (optional)
- 3.15 Installing the wall mount
- 3.16 Installing DIN rail clips (optional)
- Chapter 4: Using the software
- Chapter 5: Watchdog Timer
- Appendix
72
PE Series
Summary widget:
Displays the total amount of people detected per hour of the day,
per day of the week, or day of the month.
Camera information:
Displays camera type and resolution of the current camera being
monitored.
Age widget:
Displays a bar graph of the amount of di๎erent age groups
detected.
Export data:
Export the data collected on IEC Vision to an Excel ๎le.
Reset:
Reset the data of the Total overview window.
Total overview:
Displays the total amount of gender, age and people count.
Capture feed:
Displays the cameraโs capture feed and shows the people count
and detection.