User’s Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing the Mini PCIe card
- 3.6 Installing a nano SIM card
- 3.7 Installing an SD card
- 3.8 Installing the wireless card
- 3.9 Installing an M.2 SSD
- 3.10 Installing the antennas (optional)
- 3.11 Installing the USB 2.0 module (on selected models)
- 3.12 Installing the Serial port module (on selected models)
- 3.13 Installing the PoE LAN module (on selected models)
- 3.14 Installing the VESA mount (optional)
- 3.15 Installing the wall mount
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
86
PE200S Series
Intel Virtualization Technology
When set to [Enabled], a VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
Conguration options: [Disabled] [Enabled]
VT-d
Allows you to enable or disable CPU VT-d.
Conguration options: [Disabled] [Enabled]
Bi-directional PROCHOT
When a processor thermal sensor trips (either core), the PROCHOT# will
be driven. If Bi-directional is set to [Enabled], external agents can drive
PROCHOT# to throttle the processor.
Conguration options: [Disabled] [Enabled]
Thermal Monitor
Allows you to enable or disable Thermal Monitor.
Conguration options: [Disabled] [Enabled]
Monitor Mwait
Allows you to enable or disable Monitor Mwait.
Conguration options: [Disabled] [Enabled]
P-STATE Coordination
Allows you to change the P-STATE Coordination type.
Conguration options: [HW_ALL] [SW_ALL] [SW_ANY]
DTS
Allows you to enable or disable the Digital Thermal Sensor.
Conguration options: [Disabled] [Enabled]