User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing the VESA mount (optional)
- 3.12 Installing wall mount brackets
- 3.13 Installing DIN rail clips (optional)
- Chapter 4: Watchdog Timer
- Appendix
PE Series
27
8. SMBus connector
The System Management Bus (SMBus) connector allows you to connect
SMBus devices. This connector is generally used for communication
with system and power management-related tasks.
Connector type
Header 1x4p, 2.0mm pitch
9. GPIO connector
The GPIO connector allows you to connect a general purpose input/
output module to customize digital signal input/output.
Connector type
BOX header 2x5p, K9, 2.0mm pitch