User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing the VESA mount (optional)
- 3.12 Installing wall mount brackets
- 3.13 Installing DIN rail clips (optional)
- Chapter 4: Watchdog Timer
- Appendix
PE Series
17
Jumpers Page
1. Clear RTC RAM jumper 21
2. Display Panel VCC Power Selection jumper 22
3. COM4 Ring/+5V/+12V Selection jumper 22
4. AT/ATX Mode Conguration jumper 23
Connectors/slots Page
1. M.2 (E-key) Wi-Fi slot 27
2. Mini PCIe slot 25
3. Battery connector 28
4. M.2 (M-key) slot 26
5. I2C connector 30
6. SMBus connector 29
7. DIMM slot 20
8. Nano SIM Card slot 27
9. GPIO connector 29
10. SATA connector 24
11. SATA Power connector 24
12. Power Button connector 28
13. SPI TPM connector 31