User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing the VESA mount (optional)
- 3.12 Installing wall mount brackets
- 3.13 Installing DIN rail clips (optional)
- Chapter 4: Watchdog Timer
- Appendix
PE Series
33
NOTE:
The power adapter may vary in appearance, depending on the model and
your region. Refer to the following for more information on the dierent
power adapters, as well as the system
:
90W Power adapter
• Input voltage: 100 - 240 Vac
• Input frequency: 50 - 60 Hz
• Rated output current: 7.5 A max (90.0 W)
• Rated output voltage: 12.0 Vdc
120W Power adapter
• Input voltage: 100-240 Vac
• Input frequency: 50-60 Hz
• Rated output current: 6.0 A max (120.0 W)
• Rated output voltage: 20.0 Vdc
System
• Rated input current: 10 A - 2.5 A (90.0 W)
13.33 A - 3.33 A (120.0 W)
•
Rated input voltage: 9 - 36 Vdc