User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing the VESA mount (optional)
- 3.12 Installing wall mount brackets
- 3.13 Installing DIN rail clips (optional)
- Chapter 4: Watchdog Timer
- Appendix
PE Series
17
Jumpers Page
1. Clear RTC RAM jumper 19
2. Display Panel VCC Power Selection jumper 20
3. COM4 Ring/+5V/+12V Selection jumper 20
4. AT/ATX Mode Conguration jumper 21
Connectors/slots Page
1. M.2 (E-key) Wi-Fi slot 25
2. Mini PCIe slot 23
3. Battery connector 26
4. M.2 (M-key) slot 24
5. I2C connector 28
6. SMBus connector 27
7. DIMM slot 18
8. Nano SIM Card slot 25
9. GPIO connector 27
10. SATA connector 22
11. SATA Power connector 22
12. Power Button connector 26
13. SPI TPM connector 29