User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing the VESA mount (optional)
- 3.12 Installing wall mount brackets
- 3.13 Installing DIN rail clips (optional)
- Chapter 4: Watchdog Timer
- Appendix
PE Series
11
Speed LED
Status Description
O 10 Mbps connection
Orange 100 Mbps connection
Green 1 Gbps connection
LAN port 2 LED indications
Activity Link LED
Status Description
O No link
Yellow Linked
Yellow (blinking) Data activity
Yellow (blinking
then steady)
Ready to wake up
from suspend mode
ACT/LINK LED
SPEED LED
LAN port
System reset pinhole
The hard reset pinhole allows you to reboot your
Embedded Computer.
Power indicator
The power indicator lights up when your Embedded
Computer is turned on and blinks slowly when in sleep
mode.
Drive activity indicator
This indicator lights up when your Embedded Computer is
accessing the internal storage drive.