User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing wall mount brackets
- Chapter 4: Watchdog Timer
- Appendix
18
PE Series
Jumpers Page
1. Clear RTC RAM jumper 20
2. Display Panel VCC Power Selection jumper 21
3. COM4 Ring/+5V/+12V Selection jumper 21
4. AT/ATX Mode Configuration jumper 22
Connectors/slots Page
1. M.2 (E-key) Wi-Fi slot 26
2. Mini PCIe slot 24
3. Battery connector 27
4. M.2 (M-key) slot 25
5. DIMM slot 19
6. Nano SIM Card slot 26
7. GPIO connector 28
8. SATA connector 23
9. SATA Power connector 23
10. I2C connector 29
11. SMBus connector 28
12. SPI TPM connector 29
13. Power Button connector 30