User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing the PoE LAN module (on selected models)
- 3.11 Installing wall mount brackets
- Chapter 4: Watchdog Timer
- Appendix
10
PE Series
1.1 Features
1.1.1 Front view
LAN port with PoE (on selected models)
The 8-pin RJ-45 LAN port supports a standard Ethernet
cable for connection to a local network, and supports
Power over Ethernet (PoE).
Speed LED
Status Description
Off 10 Mbps connection
Orange 100 Mbps connection
Green 1 Gbps connection
LAN port 3 & 4 LED indications
Activity Link LED
Status Description
Off No link
Green Linked
Green (blinking) Data activity
Green (blinking
then steady)
Ready to wake up
from suspend mode
ACT/LINK LEDSPEED LED
LAN port with PoE