User’s Manual

PE100A

3.9 Installing the antennas (optional)

You may install antennas to the four (4) antenna holes located on the front

and rear panels. The installed antennas can be connected to a WWAN card

installed in the Mini PCIe slot (bottom side), or to a wireless card installed in

the M.2 Wi-Fi slot (top side).

NOTE: It is recommended that you install the antennas connected to

the WWAN card to the front panel, and install the antennas connected

to the wireless card to the rear panel.

2. Prepare the RF connector and cable.

Installing the wireless card antennas

1. Remove the rear panel cover by removing the four (4) screws from the

cover.