User’s Manual

PE100A

1. Remove the M.2 stand screw.

2. Align and insert the wireless card into its slot inside the Edge Computer

(A), then gently push down the wireless card on top of the screw hole

and fasten it using the previously removed stand screw (B).

3. (optional) Connect the antennas to your wireless card.

NOTE:

• Please refer to the Installing the antennas section for more

information on installing the antennas.

• Connecting antennas to your wireless card may strengthen the

wireless signal.

• A soft clicking sound indicates that the antenna has been securely

attached on the wireless card.

3.8 Installing the wireless card

(Top side)