User’s Manual

PE100A

3.1 Removing the bottom cover

1. Turn off your Edge Computer then disconnect all cables and

peripherals.

2. Place the Edge Computer on a flat stable surface, with its top side

facing down.

3. Remove the screw from the bottom cover (A), then remove the bottom

cover (B).

IMPORTANT!

• Ensure that your hands are dry before proceeding with the rest

of the installation process. Before installing any of the features in

this guide, use a grounded wrist strap or touch a safely grounded

object or metal object to avoid damaging them due to static

electricity.

• Turn off the power of your Edge Computer, and allow it to cool

for at least 10 minutes before performing any installation/

uninstallation process.

NOTE: The illustrations in this section are for reference only. The slots

may vary depending on model.