User guide

ASUS PCH-DR motherboard 4-21
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
EPP Mode Select EPP1.7
ECP Mode Use DMA 3
SuperIO Device
Item Specific Help
Set Base I/O address
for serial port 1.
Select Menu
Operating Mode [IDE]
Allows you to set the RAID controller operating mode. This item is
configurable only when the Onboard Promise Controller item is set to
[Enabled]. Configuration options: [IDE] [RAID]
SuperIO Device
Serial Port 1 Address [3F8/IRQ4]
Serial Port 2 Address [2F8/IRQ3]
Allow you to select the serial port base addresses. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Onboard Parallel Port [378/IRQ7]
Allows you to select the parellel port base address. Configuration options:
[Disabled] [378/IRQ7] [278/IRG5] [3BC/IRQ7]
Parallel Port Mode [SPP]
Allows you to select the parallel port mode. Configuration options: [SPP]
[EPP] [ECP] [ECP+EPP] [Normal]
EPP Mode Select [EPP1.7]
Allows you to select the EPP mode. This item becomes configurable only if
the Parallel Port Mode is set to [EPP] or [ECP+EPP]. Configuration
options: [EPP 1.7] [EPP 1.9]