User guide

2-22

Chapter 2: Hardware information

PCH-DR

PCH-DR VGA Setting

VGA_EN1

Enable

(Default)

Disable

8. Onboard VGA setting (3-pin VGA_EN1)

This jumper allows you to enable or disable the onboard VGA. Set this

jumper to disabled (pins 2-3) if you wish to install a VGA card.

PCH-DR

PCH-DR BIOS Recovery Setting

RECOVERY1

(Default)

Normal BIOS Recovery

7. Recovery setting (3-pin RECOVERY1)

This jumper allows you to update/recover the BIOS quickly.

To update the BIOS:

1. Prepare a floppy disk that contains the latest BIOS for the

motherboard (xxxx-xxx.BIN) and the AWDFLASH.EXE utility.

2. Set the jumper to pins 2-3.

3. Insert the floppy disk then turn on the system to update the BIOS.

4. Shut down the system.

5. Set the jumper back to pins 1-2.

6. Turn on the system.