User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Detaching the arm/base (for VESA wall mount)
- 2.2 Adjusting the monitor
- 2.3 Connecting the cables
- 2.4 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating modes
3-6 Chapter 3: OSD (On-Screen Display) menu
You can adjust Volume, Mute and Source from this menu.
Volume
Mute
Source
Splendid
Blue Light Filter
Color
Image
Sound
PIP/PBP Setting
Input Select
More
PB328
Standard Mode DisplayPort 2560 x 1440 @ 60Hz
: the adjusting range is from 0 to 100.
: toggles the monitor sound between on and off.
: decides the monitor sound comes from which source.
The PIP/PBP Setting allows you to open up another sub-window connected
from another video source besides the main-window from your original video
source. By activating this function, you can have two pictures from two
different video sources displayed by the monitor.
PIP/PBP Mode
PIP/PBP Source
PIP Size
PIP Position
Swap
PB328
Standard Mode DisplayPort 2560 x 1440 @ 60Hz
Splendid
Blue Light Filter
Color
Image
Sound
PIP/PBP Setting
Input Select
More
: Turns the PIP or PBP function on or off.
: Selects the video input source from among VGA, DVI,
HDMI and DisplayPort.
: Adjusts the PIP size to Small, Middle, or Large. (Only available
for the PIP mode)
: Adjusts the position of the sub-window to Right-Top, Left-
Top, Right-Bottom, or Left-Bottom. (Only available for the PIP mode)
: Switches the sources of the main and sub-windows.