User Manual

1-3ASUS PA32U Series LCD Monitor
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
6.
Shortcut
• Default: Blue Light Filter hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 2 menu.
7.
Power button/power indicator
• Turns the monitor on/off.
• The color denition of the power indicator is as the below table.
 
White On
Amber Standby mode
Off Off
 
1 2 3 4 5
76
98
10
11
 .
 . This port connects the power cord.
 . Press the switch to turn on/off power.
 . These ports are for connection with an HDMI compatible device.
HDMI-1 port specially supports few uncertain HDMI1.4 EDID devices. Press
“Input Select” key for 5 seconds for optimal EDID.
 . This port is for connection with a DisplayPort compatible
device.
The default setting of DisplayPort Stream in the OSD menu is DisplayPort
1.2. You can change it to DisplayPort 1.1 when your device output signal is
DisplayPort 1.1.
 . This port is for service only.