User Manual
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-11ASUS PA27UCX Series LCD Monitor
This function is enabled when User Mode 1 or User Mode 2 is selected.
: Compatibility with graphic card. Select DisplayPort
1.1 or DisplayPort 1.2 by graphic card DP version.
DisplayPort 1.1 is only available when Adaptive-Sync is off.
: To disable all function keys. Press the second button from the
top over five seconds to cancel the key lock function.
: Turns the power LED indicator on/off.
: Synchronizes display brightness with ambient light
changes.
To activate this function, you need to do the following: disable HDR on your
device, turn off Motion Sync and set Blue Light lter to Level 0.
: Shows the monitor information.
: “Yes” allows you to restore the default settings.
Defines the functions for Shortcut 1 and 2 buttons.
ASUS P A 2 7 U CX
Stand a r d M o de Di s p la y Po r t 3 8 40 x 2 1 6 0@ 6 0 Hz
Sh o rtcu t 1
Sh o rtcu t 2
Shortcut
: selects a function for Shortcut 1 and 2 buttons.
When a certain function is selected or activated, your shortcut key may
not support. Available function choices for shortcut: Blue Light Filter,
Brightness, HDR, Contrast, PIP/PBP Setting, Color Temp., Volume, Motion
Sync, User Mode 1, User Mode 2.