User Manual
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-3ASUS PA27UCX Series LCD Monitor
5. Shortcut 1
• Default: Brightness hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
6. Shortcut 2
• Default: HDR hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 2 menu.
7. Power button/power indicator
• Turns the monitor on/off.
• The color denition of the power indicator is as the below table.
White On
Amber Standby mode
Off Off
1
2
4
3 5
6
7
8 9
10
11
.
. Press the switch to turn on/off power.
. This port connects the power cord.
. These ports are for connection with an HDMI compatible device.
. This port is for connection with a DisplayPort compatible
device.
The default setting of DisplayPort Stream in the OSD menu is DisplayPort
1.2. You can change it to DisplayPort 1.1 when your device output signal is
DisplayPort 1.1.
. This port is for service only.
. This port is for connection with a DisplayPort/USB Type-C
compatible device. This port is also for connection with a USB upstream
cable, which supports USB power and data delivery.
This monitor is Super-Speed USB 3.1 compatible (5Gbps). The port offers
5V/3A power delivery. If Type-C2 port is connected with an adapter, this port
can supply power up to 90W (with output voltage of 5V, 9V, 15V and 20V
depending on the adapter’s ability.