User Manual
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
6
2
7
4
5
3
1
Menu
Close
Input Select
QuickFit
Brightness
HDR
1. Menu (5-way) button:
• Enter the OSD menu.
• Enact the selected OSD menu items.
• Increase/Decrease values or move your selection up/down/left/right.
2. Close button:
• Exit the OSD menu.
• Toggle the Key Lock function between on and off with a long press for 5
seconds.
3. Input select button:
• Select an available input source.
Press button (Input Select button) to display HDMI-1, HDMI-2, DisplayPort
, USB 3.1 Type-C ( ) signals after you connect HDMI/DisplayPort/USB
Type-C cable with the monitor.
4. QuickFit button:
• This is a hotkey to activate the QuickFit function designed for alignment.
• The QuickFit function contains 7 types of alignment patterns. (Please refer
to 1.3.3 QuickFit Function).