User Manual
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-7ASUS PA248CNV Series LCD Monitor
6. Input Select
In this function, you can select your desired input source.
ASUS PA248CNV
Standard Mode DisplayPort 1920 x 1200@ 75Hz
HDMI
DisplayPort
USB Type-C
Auto Source Detection
Input Select
7. System Setup
Allows you to adjust the system.
ASUS PA248CNV
Standard Mode DisplayPort 1920 x 1200@ 75Hz
Adaptive-Sync
Power Level
OSD Setup
QuickFit
DisplayPort Stream
Key Lock
Power Indicator
System Setup
• Adaptive-Sync: Allows an Adaptive-Sync supported* graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efcient, virtually stutter free and low-latency display
update.
* Adaptive-Sync can only be activated within 48Hz ~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: set DisplayPort Stream to
DisplayPort 1.2.
• Power Level:
* “Normal Level” allows the USB downstream ports/USB Type-C
ports to charge external devices when the monitor enters power
saving mode.