User Guide

3-5ASUSPA246SeriesLCDMonitor
Position• :adjuststhehorizontalposition(H-Position)andthevertical
position(V-Position)oftheimage.Theadjustingrangeisfrom0to100.
Focus• :reducesHorizonal-linenoiseandVertical-linenoiseoftheimage
byadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom
0to100.
AUTO Adjust.• :Automaticallyadjuststheimagetoitsoptimizedposition,
clock,andphase.
• Phaseadjuststhephaseofthepixelclocksignal.Withawrongphase
adjustment,thescreenshowshorizontaldisturbances.
Clock(pixelfrequency)controlsthenumberofpixelsscannedbyone•
horizontalsweep.Ifthefrequencyisnotcorrect,thescreenshowsvertical
stripesandtheimageisnotproportional.
4. PIP/PBP Setting
ThePIP/PBPSettingallowsyoutoopenupanothersub-windowconnected
fromanothervideosourcebesidesthemain-windowfromyouroriginalvideo
source.Byactivatingthisfunction,youcanhavetwopicturesfromtwo
differentvideosourcesdisplayedbythemonitor.
PIP/PBP Mode• :turnsthePIPorPBPfunctiononoroff.
PIP/PBP Source• :SelectsthevideoinputsourcefromamongVGA,DVI,
HDMI,andDisplayPort.
Size• :AdjuststhePIPsizetoSmall,Middle,orLarge.(Onlyavailablefor
thePIPmode)
Position• :Adjuststhepositionofthesub-windowtoRight-Top,Left-Top,
Right-Bottom,orLeft-Bottom.(OnlyavailableforthePIPmode)
Switch• :Switchesthesourcesofthemainandsub-windows.
TheDVIandHDMIinputsourcesshouldnotbeselectedasthemain-
window or sub-window at the same time. See the table below for details.
Main-window
Sub-window
VGA DVI HDMI DisplayPort
VGA Yes Yes Yes
DVI Yes No Yes
HDMI Yes No Yes
DisplayPort Yes Yes Yes