User Guide

2-3ASUSPA246SeriesLCDMonitor
2.3 Connecting the cables
1. Connectthecablesasthefollowinginstructions:
To connect the power cord• :connectoneendofthepowercordsecurelyto
themonitor’sACinputport,theotherendtoapoweroutlet.
To connect the VGA/HDMI/DVI/DisplayPort cable• :
PlugoneendoftheVGA/HDMI/DVI/DisplayPortcabletothemonitor’sa.
VGA/HDMI/DVI/DisplayPortjack.
ConnecttheotherendoftheVGA/HDMI/DVI/DisplayPortcabletoyourb.
computer'sVGA/HDMI/DVI/DisplayPortjack.
TightenthetwoscrewstosecuretheVGA/DVIconnector.c.
To use the earphone:• connecttheendwithplugtypetothemonitor’s
earphonejackwhenanHDMIorDisplayPortsignalisfed.
To use the USB ports• :Plugthesmallerend(typeB)oftheUSBupstream
cabletothemonitor’sUSBupstreamport,andthelargerend(typeA)toyour
computer’sUSBport.ThatwillenabletheUSBportsandcardreaderonthe
monitor to work.
Whenthesecablesareconnected,youcanchoosethedesiredsignalfromthe
Input Select item in the OSD menu.
2.4 Turning on the monitor
Press the power button .Seepage1-2forthelocationofthepowerbutton.The
power indicator lightsupinwhitetoshowthatthemonitorisON.