User Manual

4-26
第四章：BIOS 程序設置
4.4.12 iSCSI Configuration
本項目用來設置 iSCSI Initiator。
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
The worldwide unique
name of iSCSI Initiator.
Only IQN format is
accepted.
iSCSI Initiator Name
Add an Attempt
Delete Attempts
Change Attempt Order
NIC Configuration
4.4.13 Intel(R) Ethernet Connection I354
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Enables Legacy
USB support. AUTO
option disables
legacy support if
no USB devices
are connected.
DISABLE option will
keep USB devices
available only for
EFI applications.
Species the port
speed used for
the selected boot
protocol.
PORT CONFIGURATION MENU
NIC Conguration
Blink LEDs 0
PORT CONFIGURATION INFORMATION
UEFI Driver: Intel(R) PRO/1000 5.8.09
Adapter PBA: 001800-000
Chip Type Intel i350
PCI Device ID 1F41
Bus:Device:Function 00:14:00
Link Status [Disconnected]
MAC Address 40:16:7E:7F:D8:07
Virtual MAC Address 40:16:7E:7F:D8:07
Link Speed [Auto Negotiated]
Wake On LAN [Enabled]
Link Speed [Auto Negotiated]
設置所選擇的啟動協議的端口速度。設置值有：[Auto Negotiated] [10 Mbps
Half] [10 Mbps Full] [100 Mbps Half] [100 Mbps Full]
Wake On LAN [Enabled]
開啟或關閉系統使用內置 magic packet 來喚醒。設置值有：[Disabled] [Enabled]
Blink LEDs [0]
允許您通過閃爍的指示燈來識別物理網絡接口。