User Manual

ASUS P9A-I Series
4-53
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced IntelRCSetup Server Mgmt Event Logs Security Boot Monitor Tool Exit
IPv6 BMC Network Conguration
IPv6 Display Full Field [Enable]
IPv6 Display Full Formula [Enable]
IPv6 Display Letter Case [Upper Case]
IPv6 BMC DM_LAN1:
IPv6 BMC Lan Option [Enable]
IPv6 BMC Lan IP Address source [Previous State]
DM_LAN1 IP Address in BMC: 0:0:0:0:0:0:0:0
DM_LAN1 Prex Length in BMC: 64
DM_LAN1 Gateway Address in BMC : 0:0:0:0:0:0:0:0
DM_LAN1 MAC Address in BMC: 00.1F.C6.00.00.07
DM_LAN1 Address Source in BMC: DHCP Mode
IPv6 BMC LAN1
IPv6 BMC Lan Option [Enable]
IPv6 BMC Lan IP Address source [Previous State]
LAN1 IP Address in BMC: 0:0:0:0:0:0:0:0
LAN1 Prex Length in BMC: 0
LAN1 Gateway Address in BMC: 0:0:0:0:0:0:0:0
LAN1 MAC Address in BMC: 00.00.00.00.00.00
LAN1 Address Source in BMC: DHCP Mode
4.6.5 IPv6 BMC Network Configuration
This menu displays the FRU information.
Display the Full or Brief
IPv6 Field
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced IntelRCSetup Server Mgmt Event Logs Security Boot Monitor Tool Exit
No. of log entries in SEL : 0
<< System Event Log IS Empty >>
01/01/2000 01:19:45 Smbios 0x16 N/A
4.6.4 View System Event Log
This menu displays all system event logs.
DESCRIPTION
Log Area Reset
IPv6 Display Full Field [Enable]
Enable this item to display the full or brief IPv6 eld. Conguration options: [Disable] [Enable]
IPv6 Display Full Formula [Enable]
Enable this item to display the full or brief IPv6 formula. Conguration options: [Disable]
[Enable]
IPv6 Display Letter Case [Upper Case]
Conguration options: [Lower Case] [Upper Case]
IPv6 BMC Lan Option [Enable]
Enables or disables the IPv6 BMC LAN channel. When set to [Disable], BMC networking
cannot be modied during the BIOS phase. Conguration options: [Disable] [Enable]
IPv6 BMC Lan IP Address source [Previous State]
Select to congure LAN channel parameters statically or dynamically (by BIOS or BMC).
Unspecied option will not modify any BMC network parameters during BIOS phase.
Conguration options: [Previous State] [Static] [Dynamic-Obtained by BMC running DHCP]