User Manual
4-40
Chapter 4: BIOS setup
Pass Gate MonteCarlo [Disabled]
Set this item to [Enabled] to search in Algorithm to nd PG Max. Conguration options:
[Enabled] [Disabled]
The following items become congurable only when you set
Pass Gate MonteCarlo
to
[Enabled].
Pass Gate Max Failures [50]
Sets the number of failures before going into the repetition value.
Pass Gate Max Repetition [900]
Sets the maximum repetitions for MonteCarlo (Start Value).
Pass Gate Min Repetition [10]
Sets the step decrement value.
Fast Boot [Disabled]
Enable this item to accelerate the boot speed. Conguration options: [Enabled] [Disabled]
Smm Size (MB) [8]
Species the size of the SMM/TSEG region 1 MB aligned.
Force Memory Map Ax [Enabled]
Enable this item to force Memory Map for Ax parts. Conguration options: [Enabled] [Auto]
Memory Frequency [Auto]
Sets the memory frequency. Conguration options: [Auto] [DDR3-1333] [DDR3-1600]
Memory Channels [Auto]
Sets the working memory channels. Conguration options: [Auto] [Single Channel]
MRC Debug Messages [Medium]
Sets the display of debug output in MRC. Conguration options: [Disabled] [Minimum] [Medium]
[Maximum]
DDR Voltage [Auto]
Sets the memory voltage. Conguration options: [Auto] [1.25V] [1.35V] [1.50V]
Fine Ddr Voltage [100]
Sets the Fine Ddr voltage.
Mmio High [Auto]
Sets the Mmio High size. Conguration options: [Auto] [256MB] [512MB] [1024MB] [2048MB]
[4096MB] [8192MB]
CKE Power Down [Enabled]
Enables or disables the CKE Power Down feature. Conguration options: [Enabled] [Disabled]
ECC Support [Enabled]
Enables or disables the ECC support. Conguration options: [Enabled] [Disabled]