User Manual

ASUS P9A-I Series

4-39

Pass Gate Feature Enable [Enabled]

Enables or disables the Pass Gate feature. Conguration options: [Enabled] [Disabled]

2x Refresh Rate [Disabled]

Set this item to [Enabled] to apply 2x Refresh Rate regardless of the temperature.

Conguration options: [Enabled] [Disabled]

Pass Gate Test [Disabled]

Enables or disables the Pass Gate test. Conguration options: [Enabled] [Disabled]

Pass Gate Refresh [Disabled]

Set this item to [Enabled] to enable a refresh period during the pass gate test and the

test will become non-deterministic. Conguration options: [Enabled] [Disabled]

Pass Gate Test Direction [Lowest->Highest]

Sets the Pass Gate test to go through from the lowest to the highest memory modules

or from the highest to the lowest memory modules. Conguration options: [Auto]

[Lowest->Highest] [Highest->Lowest]

Pass Gate Test Repetition [900]

Sets the Pass Gate test repetitions over the same row.

Pass Gate Test Iterations [1]

Sets the Pass Gate test iterations on a row.

Pass Gate Swizzle [Auto]

Enables the Pass Gate Swizzle mode for Samsung memory modules. Conguration

options: [Enabled] [Auto]

Pass Gate Pattern [0's]

Sets the Pass Gate pattern. Conguration options: [0's] [1's]

Pass Gate Target Pattern [1's]

Sets the target Pass Gate pattern. Conguration options: [0's] [1's]

Pass Gate Speed [1x Only]

Sets the Pass Gate speed. Conguration options: [Auto] [1x Only]

Channel 0:

Rank 0 [Enabled]

Allows Rank 0 to be tested. Conguration options: [Enabled] [Disabled]

Rank 1 [Enabled]

Allows Rank 1 to be tested. Conguration options: [Enabled] [Disabled]

Rank 2 [Enabled]

Allows Rank 2 to be tested. Conguration options: [Enabled] [Disabled]

Rank 3 [Enabled]

Allows Rank 3 to be tested. Conguration options: [Enabled] [Disabled]

Channel 1: