User Manual
4-22
Chapter 4: BIOS setup
Network Stack [Disabled]
Enables or disables the network stack feature. Conguration options: [Disabled] [Enabled]
The following items appear only when Network Stack is set to
[Enabled].
Ipv4 PXE Support [Enabled]
Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be
created. Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support [Enabled]
Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be
created. Conguration options: [Disabled] [Enabled]
PXE boot wait time [0]
Sets the wait time to press Esc key to abort the PXE boot.
Media detect time [0]
Sets the wait time (in seconds) to detect a media.
4.4.8 Network Stack Configuration
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Network stack [Disabled]
Enable/Disable UEFI
Network Stack
4.4.9 CSM Configuration
Allows you to congure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add--on devices for better compatibility.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Enable/Disable CSM
Support.
Compatibility Support Module Conguration
CSM Support [Enabled]
CSM16 Module Version 07.71
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
INT19 Trap Response [Immediate]
Boot option lter [Legacy only]
Option ROM execution
Network [Legacy]
Storage [Legacy]
Video [Legacy]
Other PCI devices [UEFI]