User Manual
4-58
Chapter 4: BIOS setup
User Password
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New User Password box, key in a password, then press <Enter>.
3. Conrm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current User Password box, key in the current password, then press
<Enter>.
3. From the Create New User Password box, key in a new password, then press <Enter>.
4. Conrm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window then press <Enter>.
Secure Boot Menu
This item allows you to customize the Secure Boot settings.
Secure Boot [Disabled]
This item allows you to enable or disable the Secure Boot ow control. Conguration options:
[Disabled] [Enabled]
Secure Boot Mode [Custom]
This item allows you to select the mode of the Secure boot to change Execution policy and
Secure Boot Key management. Conguration options: [Standard] [Custom]
Secure Boot can be
enabled if
1.System running in
User mode with enrolled
Platform Key (PK)
2.CSM function is
disabled
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Security
System Mode Disabled
Secure Boot Not Active
Secure Boot [Disabled]
Secure Boot Mode [Custom]
Key Management