User Manual
華碩 P9A-I 系列主板用戶手冊
4-53
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced IntelRCSetup Server Mgmt Event Logs Security Boot Monitor Tool Exit
IPv6 BMC Network Conguration
IPv6 Display Full Field [Enable]
IPv6 Display Full Formula [Enable]
IPv6 Display Letter Case [Upper Case]
IPv6 BMC DM_LAN1:
IPv6 BMC Lan Option [Enable]
IPv6 BMC Lan IP Address source [Previous State]
DM_LAN1 IP Address in BMC: 0:0:0:0:0:0:0:0
DM_LAN1 Prex Length in BMC: 64
DM_LAN1 Gateway Address in BMC : 0:0:0:0:0:0:0:0
DM_LAN1 MAC Address in BMC: 00.1F.C6.00.00.07
DM_LAN1 Address Source in BMC: DHCP Mode
IPv6 BMC LAN1
IPv6 BMC Lan Option [Enable]
IPv6 BMC Lan IP Address source [Previous State]
LAN1 IP Address in BMC: 0:0:0:0:0:0:0:0
LAN1 Prex Length in BMC: 0
LAN1 Gateway Address in BMC: 0:0:0:0:0:0:0:0
LAN1 MAC Address in BMC: 00.00.00.00.00.00
LAN1 Address Source in BMC: DHCP Mode
4.6.5 IPv6 BMC Network Configuration
顯示 FRU 信息。
Display the Full or Brief
IPv6 Field
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced IntelRCSetup Server Mgmt Event Logs Security Boot Monitor Tool Exit
No. of log entries in SEL : 0
<< System Event Log IS Empty >>
01/01/2000 01:19:45 Smbios 0x16 N/A
4.6.4 View System Event Log
顯示所有系統事件記錄。
DESCRIPTION
Log Area Reset
IPv6 Display Full Field [Enable]
開啟此項目顯示完整或簡要的 IPv6 區域。設置值有：[Disable] [Enable]
IPv6 Display Full Formula [Enable]
開啟此項目顯示完整或簡要的 IPv6 公式。設置值有：[Disable] [Enable]
IPv6 Display Letter Case [Upper Case]
設置值有：[Lower Case] [Upper Case]
IPv6 BMC Lan Option [Enable]
開啟或關閉 IPv6 BMC 網絡通道。若設為 [Disable]，在 BIOS phase 時 BMC 網絡
無法修改。設置值有：[Disable] [Enable]
IPv6 BMC Lan IP Address source [Previous State]
選擇靜態或動態設置網絡通道參數（(通過 BIOS 或 BMC）。設置值有：[Previous
State] [Static] [Dynamic-Obtained by BMC running DHCP]