User Manual
華碩 P9A-I 系列主板用戶手冊
4-45
SATA Configuration
Sata Controller [Enabled]
本項目允許您開啟或關閉 SATA 設備。設置值有：[Enabled] [Disabled]
Sata Mode [AHCI]
本項目允許您選擇如何操作 SATA 控制器。設置值有： [AHCI] [IDE] [RAID]
IDE Mode [Legacy]
只有當【SATA Mode Selection】項目設為 [IDE]. 時系項目才會出現。設置值有：
[Native] [Legacy]
Sata speed [Gen 3]
本項目用來選擇 SATA 設備操作速度。設置值有：[Gen 1] [Gen 2] [Gen 3]
LPM [Disabled]
此項目專為 LPM (link power management) 支持設計，可獲得更好的節能狀態。
關閉此項目可關閉 SATA 端口的熱插拔功能。設置值有：[Disabled] [Enabled]
Overwrite SIR values [Disabled]
選擇是否允許覆寫 SIR 值。設置值有：[Disabled] [Enabled]
SATA Port 1
Sata port 1 [Enabled]
開啟或關閉連接到 SATA 端口 1 的 SATA 設備。設置值有：[Enabled]
[Disabled]
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced IntelRCSetup Server Mgmt Event Logs Security Boot Monitor Tool Exit
Enables/Disables sata
controller if supported
by current cpu SKU.
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
SATA controller
Sata controller [Enabled]
Sata mode [AHCI]
IDE Mode [Legacy]
Sata speed [Gen 3]
LPM [Disabled]
Overwrite SIR values [Disabled]
SATA Port 1 [Not Installed]
Sata port 1 [Enabled]
Spin up [Disabled]
Hot plug [Enabled]
External device [Disabled]
Mechanical Switch [Disabled]
SATA Port 2 [Not Installed]
Sata port 2 [Enabled]
Spin up [Disabled]
External device [Disabled]
Hot plug [Enabled]
Mechanical Switch [Disabled]